Table of Contents
Advertisement
When installing the hub stack on a level surface, attach the rubber feet to the
bottom of each device. The rubber feet cushion the hub and protect the hub
case from scratching.
Rack Mounting
The hub can be mounted in an EIA standard-size, 19-inch rack, which can be
placed in a wiring closet with other equipment. Attach the mounting brackets
at the hub
front panel (one on each side), and secure them with the provid-
ed screws.
Then, use screws provided with the equipment rack to mount each hub in the
rack.
Unpacking and Setup
11
Hide quick links:
Advertisement
Table of Contents
