Getting Started; Management - D-Link DFE-2600 User Manual

Dual-Speed Stackable Hub Web-based Management User's Guide

Getting Started

The first step in getting started in using web-based management for your Hub
is to secure a web-browser. A web-browser is a program which allows a per-
son to read hypertext, for example, Netscape Navigator or Microsoft Internet
Explorer. Follow the installation instructions for the browser.
The second and last step is to configure the IP interface of the Hub. This can
be done manually through a console (see the In-Band Setup Instructions on
page 39) or defined in the Boot Configuration File (see Appendix B).

Management

To begin managing your hub stack simply run the web browser you have in-
stalled on your computer and open the IP address you have defined for the
master hub.
In the page that opens, click on the Login to DFE-2600 series Web-based
Management button. This opens the main page in the management module.
The top of the main page has a button labeled Click Here to Load Panel.
Clicking on this button causes an interactive view of the hub stack front
panel to be shown in the top portion of the window. The three interactive
features of this interactive hub stack (which can also be found in the Fault -
Group/Port Control menu option) are described below:
Hub ID
72 Web-based Network Management