User - D-Link DFE-2600 User Manual

Administration State
abled or disabled.
Reset
Doing a remote reset is equivalent to turning the hub off and on again. All
parameters are returned to the values stored in EEPROM.
Click RESET to reset the Hub.

User

The User menu allows you to monitor and configure a number of settings for
individual ports.
User List
Clicking on the User List option on the left side of the screen displays a rep-
resentation of your hub stack. Clicking on one of the ports displays the
Ethernet (MAC) addresses of packets recently received by the port and when
they were received, as shown below.
Web-Based Network Management
Indicates the port partition status, either en-
89