D-Link DFE-2600 User Manual page 70

Dual-Speed Stackable Hubs User's Guide
hh:mm:ss.xx, with hh representing hours since the master hub was
turned on, mm the minutes, ss the seconds, and xx representing 100ths
of a second.
Group Slot (1). Shows the status of module slot 1. If there is a mod-
ule installed in slot 1, this field will display: MII, TP, FX, or Switch as
determined by the type of module installed. If there is no module in-
stalled, the field will display
Group Slot (2). Shows the status of module slot 2. If there is a mod-
ule installed in slot 2, this field will display: MII, TP, FX, or Switch as
determined by the type of module installed. If there is no module in-
stalled, the field will display
Group Isolate. Provides control of the hub
nection status and allows the system manager to manually isolate a
particular hub as needed and reconnect it later. Toggling the field to
solate" separates the hub
Toggling the field to
egmenting Hubs" earlier in this chapter for more information.
DFE-2600 Stackable Hub - Network Monitoring : Group Configuration Menu
Group ID (1-5)
Group Serial Number:
Group Position Number:
Group Description:
Group Role:
Group Port Capacity:
Group Hardware Revision:
Group Master Revision:
Group Status:
Group Last Oper Change:
Group Slot (1):
Group Slot (2):
Group Isolate:
58
one."
one."
data connection from the other hubs.
econnect" re-establishes the connection. See
[1]
PREV GROUP NEXT GROUP
Master Hub Setup and Management
current network con-
623000B
DFE2624i
Primary Master
24
Rev. 06
Rev. 01
Up
0:1:35.90
Switch
none
<Reconnect>
HELP SAVE EXIT