D-Link DFE-2600 User Manual page 90

Dual-Speed Stackable Hub Web-based Management User's Guide
The fields are described as follows:
Software Update Mode Set to either network or out-of-band. Deter-
mines whether the configuration file should be obtained through the
Ethernet network or through the console port.
Software Update Control
download its configuration file the next time the Hub is booted.
Boot File The path and configuration file name on the TFTP server. If
you are using bootp-tftp mode, or if Get IP From BOOTP Server is en-
abled, the pathname will be obtained from the BOOTP server.
Boot Server Address
configuration file is located.
Boot Protocol
Software Update Control is enabled.
Get IP From Bootp Server
from the BOOTP server.
78
Determines whether or not the Hub should
The IP address of the TFTP server where the
Set to either bootp-tftp or tftp only. Applies only if the
If enabled, the IP address will be obtained
Web-based Network Management