Tools, Meter And Devices - 3Com 5000 Series Installation Manual

3Com Router 5000 Family
Installation Guide
Warning:
It indicates that this operation is incorrect and may seriously damage the router or
endanger the operator. Please follow the correct operation procedures for sake of
safety.
Caution:
It indicates that during the installation and usage of the router, the operation needs
attention. This operation is incorrect and perhaps will affect the normal operation of the
router.
Please follow the following safety recommendations during the installation and use of
the router:
Keep the router away from any wet place or heat source.
Make sure that the router is normally grounded.
Please wear an ESD-preventive wrist strap before installation, and make sure one
end of it well contacts your skin, and the other end is well grounded.
Do not hot swap the interface modules of the router and any cable.
Correctly connect the interface cable for the router. Do not connect the telephone
cable (including the ISDN cable) to the AUX port or the console port.
Always use Uninterrupted Power Supply (UPS).

3.3 Tools, Meter and Devices

I. Tools
Phillips screwdriver
Straight screwdriver
ESD-preventive wrist strap
II. Cables
PGND wire and power cord
Console cable
Auxiliary cable
Ethernet cable
Interface cable for selected interface modules
3Com Corporation
3-4
Chapter 3 Installation Preparation