Setting The Alarms - Sainlogic WS0355 User Manual

When an alarm condition is exceed, the alarm icon will flash
(visual) and the alarm beeper will sound (audible). To
silence the beeper, press any key.
8.2 View High/Low Alarms Value
To view the current alarm settings, press the ALARM key to
enter the alarm mode. HI AL 1 will be displayed in the date
area. At the same time Alarm 1 time and HI alarm parameters
of indoor temperature and humidity, outdoor temperature and
humidity, 1h rainfall, wind gust, wind average, absolute
pressure, UV index, Sunlight are displayed.
Press SET key to view Alarm 2 time and HI alarm parameters
of, 24h rainfall, outdoor dew point, feels like and relative
pressure.
Press ALARM key again to view the LOW alarms along with
the alarm clock time in the same way as HI alarms.
Press ALARM key again to return to normal mode.
Note: Press the SNOOZE key at any time to return to the
normal mode in HI/Low alarm mode.

8.3 Setting the Alarms

Press ALARM key to enter the alarm mode.
Press and hold the SET key for three seconds. The first alarm
parameter will begin flashing (alarm hour).
- 12 -