Sensor Search Mode - Sainlogic WS0355 User Manual

12. Sunlight Display Units (default: W/ ㎡ ). Press the SET
key again to change the sunlight units of measure. Press the
CHANNEL/+ key or MAX/MIN/- key to toggle the sunlight units
between , W/㎡, fc or lux.
13. Barometric Pressure Display Units(default: InHg).
Press the SET key again to change the pressure units of
measure. Press the CHANNEL/+ key or MAX/MIN/- key to
toggle the pressure units between mmhg, inHg or hPa.
14. Pressure Threshold Setting (default level 2). Press the
SET key again to change the pressure threshold. Press the
CHANNEL/+ key or MAX/MIN/- key to change pressure
threshold 2 hPa to 4 hPa. (For detailed information of this part
please refer to 10.5)
15. Weather Icons Setting (default: partly cloudy). Press
the SET key again to change the initial weather icon. Press the
CHANNEL/+ key or MAX/MIN/- key to select the initial weather
icon of Sunny, Cloudy, Partly Cloudy or Rainy. (For detailed
information of this part please refer to 10.2)
16. Time SYNC(default: ON). Press the SET key again to set
the network time sync. Press the CHANNEL/+ key or
MAX/MIN/- key to switch between SYNC time ON/OFF of
measure. Synchronize the time of the device with WiFi.
17. Location Division. (default: Northern Hemisphere).
Press the SET key again to change the location division. Press
the CHANNEL/+ key or MAX/MIN/- key to toggle the position
of the earth Northern Hemisphere (NOR) or Southern
Hemisphere (NOR). (Refer to 5.0 Final Installation of Sensors)

7.3 Sensor Search Mode

- 8 -