Elite ProAV Pro Frame Thin ATD4 Series User Manual

Product Description:
The Pro Frame Thin ATD4 Series is a fixed frame projection screen that uses Elite's EDGE
FREE® technology. The EDGE FREE® design resembles a giant size flat panel TV display. The Pro Frame Thin
includes a bezel trim to further enhance the frame appearance and absorb projector overshoot. An optional LED
kit is available for back-lighting.
Congratulations on your new Pro Frame Thin ATD4 purchase! The ISF Certified CineGrey 4D AT is an ambient and
ceiling light rejecting (ALR/CLR®) front projection screen material that is perforated for acoustic transparency. It
is precisely formulated for environments with minimal control over room lighting. It was designed to enhance
picture brightness, offer accurate color fidelity, improve contrast and allow sound to pass through.
Maintenance and Care
In order for the CineGrey 4D AT material to maintain its projection qualities and provide optimum performance
please refer to the list below for proper maintenance and cleaning.
The following precautions should always be followed to avoid damaging the material, which is not covered
under warranty.
• Use a dry microfiber cloth or a soft bristle brush to remove dust from the screen's surface.
• When cleaning, use a damp microfiber cloth with warm water to remove any marks.
• Never rub or apply pressure when cleaning the surface.
• Never attempt to use any chemicals such as acetone, benzene, alcohol, organic solvents or abrasive
cleaners to clean the screen surface.
• To avoid damaging the screen, avoid touching it directly with your fingers, pens/pencils or any other sharp
or abrasive objects.
Rev.08012024JA
Ceiling Ambient Light Rejecting Acoustically Transparent
Visit
www.eliteproav.com
Pro Frame Thin ATD4 Series
EDGE FREE® Fixed Frame Screen
USER'S GUIDE - V1.0
www.eliteproav.com for latest updated version.
1