Advertisement
Quick Links
Advertisement
Related Manuals for Knightsbridge EMPOWER4
Summary of Contents for Knightsbridge EMPOWER4
- Page 1 INSTALLATION & MAINTENANCE MANUAL EMPOWER4 / EMPOWER4W...
-
Page 2: General Instructions
These instructions should be read carefully and retained after installation by the end user for future reference and maintenance. These instructions should be used to aid installation of the following products: EMPOWER4 / EMPOWER4W SAFETY • This product must be installed in accordance with the latest edition of the IEE Wiring Regulations (BS7671) and current Building Regulations. - Page 3 Provide power to the required point of installation • • This product is Class II double insulated • This product is IP20 rated Cut a suitable hole in the mounting surface as per the cut-out details (see Fig. 1) ensuring not to •...
- Page 4 • Remove the bezel and lens by inserting a small flat screwdriver into the edge of the bezel and lift out • Fit the required lens and bezel, ensuring the two clips on the rear of the bezel are aligned with the slots on the fitting •...
-
Page 5: Warranty
WARRANTY This product has a warranty of 5 years from date of purchase. Failure to install this product in accordance with the current edition of the IEE Wiring Regulations (BS7671), improper use, or removal of the batch code will invalidate the warranty. If this product should fail within its warranty period, it should be returned to the place of purchase for a free of charge replacement. - Page 6 230V IP20 25°C 50Hz SUPPLIED BY: (UK) MANUFACTURER (EU) AUTHORISED REPRESENTATIVE ML ACCESSORIES LTD, SLV LIGHTING GROUP, UNIT E CHILTERN PARK, DAIMLERSTRASSE 21-23, BOSCOMBE ROAD, DUNSTABLE 52531 ÜBACH-PALENBERG, GERMANY LU5 4LT, EMAIL: EPREL@GROUP.SLV.COM WWW.MLACCESSORIES.CO.UK DCAPR23_V1 MADE IN CHINA...
- Page 7 230V 50Hz, IP20, Class 2, Non-Dim, Non-IC, house, Ta 0~45...
Need help?
Do you have a question about the EMPOWER4 and is the answer not in the manual?
Questions and answers