Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Knightsbridge EMXSTL
Summary of Contents for Knightsbridge EMXSTL
- Page 1 INSTALLATION & MAINTENANCE MANUAL EMXSTL...
- Page 2 These instructions should be read carefully and retained after installation by the end user for future reference and maintenance. These instructions should be used to aid installation of the following product: EMXSTL SAFETY • This product must be installed in accordance with the latest edition of the IEE Wiring Regulations (BS7671) and current Building Regulations.
- Page 3 Provide power to the required point of installation • Remove the top plate by inserting a screwdriver into the slots on the side (see Fig. 1) • Insert screwdriver to release top plate LED indicator Fig. 1 Test button LED indicator Test button k the location of the fixing holes and drill the holes ensuring not to infringe with any gas Fig.
- Page 4 • For non-maintained operation, remove the 2-pin connector from the circuit board (see Fig. 3). For maintained operation keep it in place. This fitting cannot be connected for switched-maintained operation Fig. 3 Fig. 3 • Ensure the battery is connected via the plug and socket to the PCB Ensure the battery is connected via the plug and socket to the PCB •...
- Page 5 LED INDICATOR STATUS Solid green Normal conditions / charging / test successful 1 Red flash Battery fault 2 Red flashes Lamp fault 3 Red flashes Duration test failure NB: power should be cut off and restored to the unit to clear a fault indication once the condition is rectified Tests can also be initiated manually as follows: TEST BUTTON GREEN LED...
- Page 6 WARRANTY This product has a warranty of 3 years from date of purchase. Failure to install this product in accordance with the current edition of the IEE Wiring Regulations (BS7671), improper use, or removal of the batch codes will invalidate the warranty. If this product should fail within its warranty period it should be returned to the place of purchase for a free of charge replacement.
- Page 7 GENERAL The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire should be replaced. Clean with a soft dry cloth only, do not use aggressive cleaning products or solvents which may damage the product.
- Page 8 TEST RECORD SHEET SIGNED DATE INITIAL COMMISSIONING 3 HOUR TEST FIRST YEAR SECOND YEAR THIRD YEAR FOURTH YEAR FIFTH YEAR MONTH TEST SIGNED DATE SIGNED DATE SIGNED DATE SIGNED DATE SIGNED DATE FUNCTIONAL FUNCTIONAL FUNCTIONAL FUNCTIONAL FUNCTIONAL FUNCTIONAL FUNCTIONAL FUNCTIONAL FUNCTIONAL FUNCTIONAL FUNCTIONAL...
Need help?
Do you have a question about the EMXSTL and is the answer not in the manual?
Questions and answers