Advertisement
Table of Contents
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Knightsbridge SLIGHT2
Summary of Contents for Knightsbridge SLIGHT2
- Page 1 INSTALLATION & MAINTENANCE MANUAL SLIGHT2 230 V 50Hz...
- Page 2 These instructions should be read carefully and retained after installation by the end user for future reference and maintenance. These instructions should be used to aid installation of the following product: SLIGHT2 Installation of this driver should only be carried out by a qualified electrician or com SAFETY latest Building and current IEE Wiring Regulations (BS7671) •...
- Page 3 Fig 1 • Remove the LED tube by pushing it in at one end and gently pulling out of the lamp holders • Remove the LED tube by pushing it in at one end and gently pulling out of the lamp holders Using the fitting as a template, mark the location of the fixing holes and drill the holes ensurin •...
- Page 4 WARNING The lamp in this product must be disconnected from the circuit if it subjected to any high voltage or insulation resistance testing. Irreparable damage will occur if this instruction is not followed. GENERAL The product should be recycled in the correct manner when it reaches the end of its life. Check local authorities for where facilities exist.
Need help?
Do you have a question about the SLIGHT2 and is the answer not in the manual?
Questions and answers