ENHANCED VISION merlin elite Pro User Manual page 7

Caring for Merlin Elite Pro
• Always turn the power OFF by pressing the power button on the front of the device for five
seconds when Merlin Elite Pro is not in use. (Do not try to Shut Down the device by
spontaneously removing from power while device is in operation)
• Optionally you may also place the device into "Standby" state which is a power saving mode
by pressing the power button for less than 5 seconds.
• Ensure that your Merlin Elite Pro is completely OFF before cleaning.
• Clean Merlin Elite Pro with a soft dry cloth or an electrostatic dusting cloth. DO NOT use
liquid cleaners on its plastic surfaces.
• The protective glass covering the camera can be cleaned as needed with the lens cloth
provided within the packaging of Merlin Elite Pro.
Susceptibility to Interference:
There may be temporary degradation of the image when Merlin Elite Pro is subjected to a
strong radio frequency field, electro-static discharge or transient electrical noise. An electro-
static discharge (caused by static electricity) may cause the screen to go blank. If this happens,
disconnect the AC power from the electrical outlet, wait 30 seconds, and connect the AC
power again.
7