ENHANCED VISION merlin elite Pro User Manual page 6

Additional Electrical Safety Precautions
• The power supply cord is a disconnect device for electrical equipment. The socket-outlet
should be installed near the equipment and be easily accessible.
• This product is equipped with a 3-wire grounding type plug as a safety feature. This plug has
a third (grounding) pin and can only be plugged into a grounding-type power outlet. If
necessary, contact an electrician to replace your power outlet with a grounding-type power
outlet.
• Do not use Merlin Elite Pro in, near or around water. Merlin Elite Pro is not designed to offer
protection against contact with liquids of any kind.
• Use only the power supply provided with your Merlin Elite Pro. Using unauthorized power
supplies may cause serious damage to Merlin Elite Pro's electronic components.
• Using any other power supply than the one provided by Enhanced Vision for Merlin Elite Pro
will void the warranty.
• Always place the power cord away from traffic areas to avoid damage of power supply.
• Prevent the risk of electrical shock by NOT attempting to disassemble the unit. Please refer
all service to an authorized repair facility.
• Please ensure that you make connections that match those shown in Figure 2 on page 10.
Transporting Merlin Elite Pro
• Use caution if you are repositioning Merlin Elite Pro a short distance across a desk or table.
Make sure you do not pull on any power cords or connector cables.
• Disconnect and secure all power and video cables before moving the unit.
• Carry the unit only by the recessed handles located on the undersides of device. Do not carry
Merlin Elite Pro by the Camera Assembly/Chassis. (See Figure 1 Safe Transport Page 10)
6