Advanced Tab - StarTech.com STCST2000SPEXI Manual

Gigabit Network Device Considerations
Per the IEEE specification, gigabit speed is available only in full
duplex.
The settings available when auto-negotiation is disabled are:
• 10 Mbps or 100 Mbps Full duplex (requires a full duplex
capable link partner set to full duplex). The adapter can send
and receive packets at the same time. You must set this mode
manually.
• 10 Mbps or 100 Mbps Half duplex (requires a link partner
set to half duplex). The adapter performs one operation at
a time; it either sends or receives. You must set this mode
manually.
• Auto-Negotiation 1000 Mbps. The adapter only advertises
gigabit speed at full duplex.

Advanced Tab

All of the settings explained in the following sections can
be accessed / modified from the Advanced tab in the device
properties:
Open the Device Manager and expand the Network
1.
Adapters section.
Right-click the Intel i350 Gigabit Network Connection you
2.
wish to configure
and select Properties.
Click the Advanced tab.
3.
Make your desired modifications.
4.
Click OK to apply the changes.
5.
Instruction Manual
5