Advanced Tab; Gigabit Master Slave Mode - StarTech.com ST2000SPEXI Instruction Manual

Dual port pci express (pcie x4) gigabit ethernet server adapter network card - intel i350 nic

Hide thumbs Also See for ST2000SPEXI:

Table of Contents

• Auto-Negotiation 1000 Mbps. The adapter only advertises gigabit speed at

full duplex.

Advanced Tab

All of the settings explained in the following sections can be accessed / modified from

the Advanced tab in the device properties:

1. Open the Device Manager and expand the Network Adapters section.

2. Right-click the Intel i350 Gigabit Network Connection you wish to configure

and select Properties.

3. Click the Advanced tab.

4. Make your desired modifications.

5. Click OK to apply the changes.

Decides whether the adapter or link partner, is designated as the master. The other

device is designated as the slave. Changing the setting can improve link quality with

certain link partners.

NOTE: Some multi-port devices can be forced to master mode. If forced to master

mode, the device can either disconnect or downshift to a 100-Mbps link. This issue can

also occur in a Forced Slave to Forced Slave mode. Changing this setting can cause a

momentary loss of connectivity.

Instruction Manual

Table of Contents

Do you have a question about the ST2000SPEXI and is the answer not in the manual?