StarTech.com STCST2000SPEXI Manual page 30

• A maximum of 64 VLANs per network port or team are
supported by Intel software.
• VLANs can co-exist with teaming. If you do this, the team
must be defined first, then you can set up your VLAN.
• You can set up only one untagged VLAN per adapter or team.
You must have at least one tagged VLAN before you can set
up an untagged VLAN.
• Intel ANS VLANs are not compatible with Microsoft's LBFO
teams. Intel® PROSet will block a member of an LBFO team
from being added to an Intel ANS VLAN. You should not add
a port that is already part of an Intel ANS VLAN to an LBFO
team, as this may cause system instability.
Configuring VLANs
Open the Device Manager and expand the Network Adapters
1.
section.
Right-click the Intel i350 Gigabit Network Connection you
2.
wish to configure and select Properties.
Click the VLANs tab.
3.
Add, Remove or Modify your VLAN settings as applicable to
4.
your network.
Click OK to apply the changes.
5.
Instruction Manual
27