Log Link State Event - StarTech.com STCST2000SPEXI Manual

CAUTION: Make sure no other systems on the network use this
address.
NOTES:
• Do not use a multicast address (least significant bit of the
high byte = 1).
For example, in the address 0y123456789A, "y" cannot be an
odd number. (y must be 0, 2, 4, 6, 8, A, C, or E.)
• To restore the default MAC address, click Use Default.
• You cannot change the address if the adapter is part of a
team.
• Changing this setting may cause a momentary loss of
connectivity.
The LAA setting is disabled and cannot be changed if one or
more of the following
is true:
• The device is configured to iSCSI boot primary or secondary.
• The device or team is bound to the Microsoft Virtual Switch
Protocol.

Log Link State Event

Enables the logging of the following link state changes to the
system event log:
LINK_UP_CHANGE - When this message is displayed, the link is
up.
LINK_DOWN_CHANGE - When this message is displayed, the
link is down. To investigate this issue, click the Link Speed tab
and run diagnostics.
Instruction Manual
9