5
F
Input meter
Indicates the level of the signal being input to the internal effect.
G
Input patch
Click the L CHANNEL or R CHANNEL area, and choose one of the following as the signal route that will be
patched to the L/R input channels of the internal effect.
NONE
MIX 1...MIX 24
INS CH1...INS CH48
INS STIN1L, INS STIN1R...INS STIN4L, INS STIN4R
INS MIX1...INS MIX24
INS MTRX1...INS MTRX8
INS STAL, INS STAR
INS STBL, INS STBR
INS MON L, INS MON R, INS MON C
If you select something other than NONE or INS MON as the insert destination, the channel name will appear in
the box located immediately below.
EEffect parameters
This area shows the effect parameters and knobs for the
currently selected effect type.
6
8
Not inserted
Output of MIX channels 1–24
Insert Out of input channels 1–48
Insert Out of ST IN channels 1–4 (L/R)
Insert Out of MIX channels 1–24
Insert Out of MATRIX channels 1–8
STEREO A channel (L/R) insert out
STEREO B channel (L/R) insert out
MONITOR channel (L/R/C) insert out
51
7
9
PM5DV2/DSP5D Editor Owner's Manual