Word Clock Window - Yamaha DSP5D Editor Owner's Manual

Word Clock window

In this window of the editor you can edit and view the DSP5D's word clock settings.
Choose [Windows] → [System] → [Word Clock] to access this window.
DSP5D Editor does not have a corresponding window.
A
MASTER CLOCK SELECT
This selects the master clock that will be used; either the internal clock or an external clock received via a connec-
tor or slot. This setting will determine the sampling rate at which the DSP5D will operate. You can select the fol-
lowing items.
Indication (button)
SLOT 1–SLOT 2
The status (operating condition) of each clock is indicated by the color of the
button. Each color has the following significance.
• LOCK ( )
This indicates that a clock synchronized with the source selected in
connected to the corresponding connector/slot, input/output is occurring correctly between that device and
the DSP5D. If the sampling rate is close, this status may be shown even if the source is not synchronized.
1 2
DSP5D's internal clock (sampling rate = 96 kHz)
DSP5D's internal clock (sampling rate = 88.2 kHz)
DSP5D's internal clock (sampling rate = 48 kHz)
DSP5D's internal clock (sampling rate = 44.1 kHz)
Word clock supplied from the WORD CLOCK IN connector
Word clock supplied from the CASCADE IN (D-sub) connector
Word clock supplied from the CASCADE IN (RJ-45) connector
Clock data from a digital audio signal supplied via a digital I/O card in slots 1–2 (can be
selected in two-channel units)
3
Content
1
is being input. If an external device is
74
symbol located at the left of each
PM5DV2/DSP5D Editor Owner's Manual