Yamaha DSP5D Editor Owner's Manual page 30

❏ CH to MIX (Channel to mix)
A MIX send level
This adjusts the send level of the signal sent from the input channel to VARI-type MIX buses. The current value is
shown in the numerical box immediately above.
B Pair
This indicates the pairing status of adjacent odd-numbered/even-numbered MIX channels. You can click the
heart symbol to enable/disable pairing.
C ON (MIX send on/off)
This is an on/off switch for the signal sent from the input channel to the MIX bus.
D PRE (Pre/Post)
This selects PRE or POST as the point from which the signal is sent from the input channel to the MIX bus.
E CH to MIX PRE POINT
This selects PRE EQ or PRE FADER as the point from which the signal is sent when the PRE button (
PRE.
If the PRE button is set to POST, you can select either POST ON or POST TO ST as the signal send loca-
NOTE
tion individually for each MIX bus ( ➥ p.35).
2
1
3
4
5
30
4
PM5DV2/DSP5D Editor Owner's Manual
) is set to