Input Channel Auto Naming Function; Input Channel Auto Naming Procedure - Yamaha PM1D Supplementary Manual

System software v1.6
Hide thumbs Also See for PM1D:
Table of Contents

Advertisement

Input Channel Auto Naming function

As explained earlier, V1.5 added the capability of displaying the channel name or port name in the INPUT
[NAME] indicator of the INPUT block.
However if necessary, it is also possible to specify that the patched port name be always displayed as the input
channel name for only a specific input channel. This is referred to as the "Input channel auto naming function."

Input Channel Auto Naming procedure

The auto naming procedure is as follows.
1. Access the IN PATCH/OUT PATCH function NAME
screen.
2
1
2. In the LIST SELECT area (1), move the cursor to
the INPUT button and press the [ENTER] switch.
The name list (2) will show a list of the short names
(four characters) and long names (eight characters)
assigned to each input channel.
Input Channel Auto Naming function
3. In the name list, select the desired input channel,
and move the cursor to the short name field.
4. Make sure that the cursor is located at the first
character of the text box (3) at right, and click the
UNIT NAME ASSIGN button of the character pal-
ette (4).
A highlighted "U" character will be input into the
character palette.
3
4
11

Advertisement

Table of Contents
loading

Table of Contents