Yamaha DSP5D Editor Owner's Manual page 33

L TYPE I/TYPE II (EQ type)
Selects either TYPE I (an algorithm equivalent to the EQ in the earlier 02R series) or TYPE II (a newly developed
algorithm) as the EQ type.
M EQ LINK GROUP
Selects the EQ link group (A–F) to which that channel belongs.
N
UPPER/LOWER
Switches the four bands affected by controls
HIGH).
❏ DELAY
This is the same as for the delay settings of an input channel (➥ p.28).
❏ DCA GROUP / MUTE GROUP / SAFE
A
DCA GROUP
Selects the DCA group (7/8) to which the MIX channel belongs.
B
MUTE GROUP
Selects the mute group (1–8) to which the MIX channel belongs.
C
RECALL SAFE / MUTE SAFE
These enable/disable Recall Safe and Mute Safe for the MIX channel.
3 9
– between LOWER (1 LOW–4 HIGH) and UPPER (5 LOW–8
1 2
33
3
PM5DV2/DSP5D Editor Owner's Manual