Port Trim Window - Yamaha DSP5D Editor Owner's Manual

Pm5dv2 / dsp5d editor owner's manual

Hide thumbs Also See for DSP5D Editor:

Table of Contents

Port Trim window

PM5D Editor does not have a corresponding window.

Here you can make ﬁne adjustments to the AD input/output gain.

As necessary, make ﬁne adjustments to the gain of the speciﬁed analog input/output port. You can adjust this in

0.1 dB units for input ports, and in 0.01 dB units for output ports. When the unit is shipped from the factory, the

input levels of each port are set to match, so there is normally no need to adjust this.

If you need to make ﬁne adjustments to the gain, hold down the left mouse button on the dB area of the desired port,

and move the cursor up/down; alternatively, you can double-click the dB area and enter a value. If you want to return

all input ports to their factory-set state, click the FACTORY PRESET button. When you click the OK button, the Port

Trim window will close.

PM5DV2/DSP5D Editor Owner's Manual

Table of Contents

Pm5dv2 editor