Acelity V.A.C.ULTA Maintenance Manual page 21

V.A,C. VERAFLO" Therapy
a ili iii AE _
Go à Instill Pump Performance
Pump Duty: 0
| J Motor speed: 0 00:00:00
'VAC. VERALINK™ Cassette NotEngaged |
Alarm /
Solution Bag / Bottle Empiy Alarm
(i) VAC. VERAFLO" Blockage Alarm |
00:00:00
Back ac 'Checklist
Mode: Continuous
QC Checklist
Logs
Version: 0
Language Version: 0
Version: 0
| Complete
5. Ifthe value continues to display > 88%
。 Press and hold the Power button until the display turns off
to turn the V.A.C.ULTA™ Therapy Unit off.
+ . Verify that all plugs are undamaged and firmly attached to
the V.A.C.ULTA™ Therapy Unit.
。 Press and hold the Power button until the light comes on to
turn the V.A.C.ULTA™ Therapy Unit on.
* Verify the V.A.C.ULTA" Therapy Unit is receiving power when
plugged into the AC wall outlet.
« Press the QC Checklist button on the Startup screen.
ㆍ Press the Advanced QC button from the QC Checklist
screen.
* Type the Advanced QC Code M8G77R in the Access Code
window on the Znter Access Code screen and press the OK
button.
。 Press the Arrow button displayed next to V.A.C. VERAFLO""
Therapy from the QC Check/ist screen.
。 Press the Arrow button displayed next to Instill Pump
Performance on the A.C. VERAFLO™ Therapy screen.
«If after powering down and re-running test the Pump Duty
value is still greater than 88%, contact KCI (see page 30).
6. If the Pump Duty value is < 88% press the QC
Checklist button to return to the OC Check/ist
screen.
7. Press the Arrow button displayed next to Restore
Patient Defaults.
レー ニン ーー ニーー
Complete
8.
Press the Complete button.