Related Manuals for HOOKE ROAD BXG.3005
Summary of Contents for HOOKE ROAD BXG.3005
- Page 1 BXG.3005 Side Steps (1) Contents: 1x Driver Side Bar 1x Passenger Side Bar Attached bolts (2) Tools required: a.13mm Long Socket Wrench; b.10mm Wrench;...
- Page 2 About 1 hour, 2-3 people may be needed. Installation time may differ according to your mechanical skill level. (PLEASE VERIFY ALL PARTS ARE PRESENT AND READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION!) To view the electronic version (BXG.3005), please scan the QR code.
- Page 3 (4) Installation instruction: Step 1: Remove the original side step bars first. Step 2: Install the driver side first. As shown below.
- Page 4 Step 3: Bolt onto the factory mounting points on your Wrangler. Step 4: Tighten it with the original bolts(Or the attached bolts). As shown below(Figure 1 to Figure 5).
- Page 5 Step 5: Repeat above steps for the passenger side. Step 6: Installation completed.
- Page 6 1.The product parts in this instruction may differ slightly from the actual product contents but generally does not affect the installation of the product. 2.Please feel free to contact your distributor if you have any kind of question about your purchase. Hooke Road to find your parts...
Need help?
Do you have a question about the BXG.3005 and is the answer not in the manual?
Questions and answers