Download Print this page

BENDIX Intellipark Service Data page 14

Electronic park brake (epb) system
Hide thumbs Also See for Intellipark:

Advertisement

OPERATIONAL CONDITIONS: NORMAL
The LEDs on the Dash Electronic Control Unit (DECU) are
one indicator the Bendix
Brake (EPB) system is performing under normal operating
conditions. Refer to the applicable Operator's Manual on
B2Bendix.com for interlocks and all parking and unparking
operation.
LED1
LED2
On
On
On
On
On
On
Off
Off
On
On
Off
Off
Blinking
Blinking
On
On
Table 2 – DECU LED Operations - Normal Conditions
LED 1
14
Intellipark
Electronic Parking
®
®
LED3
LED4
On
On
All LEDs illuminate for three (3) seconds when ignition is applied.
All LEDs remain illuminated for a minimum of three (3) minutes after
On
On
ignition key is off.
Three (3) seconds after ignition is applied, and both the power
On
On
vehicle and the towed vehicle are parked.
Three (3) seconds after ignition is applied, and both the power
Off
Off
vehicle and the towed vehicle are unparked.
Off
Off
The towed vehicle is parked, and the power vehicle is unparked.
On
On
The towed vehicle is unparked and the power vehicle is parked.
A Rollaway Mitigation event has occurred for both the tractor and the
Blinking
Blinking
trailer.
A Rollaway Mitigation event has occurred for the tractor only or the
Blinking
Blinking
tractor pressure sensor is faulted.
LED 2
LED Operation
LED 3
Status
LED 4

Advertisement

loading
Need help?

Need help?

Do you have a question about the Intellipark and is the answer not in the manual?

Questions and answers