Roban EC-145 T1 Instruction Manual

Roban EC-145 T1 Instruction Manual

Scale fuselage 450 size
Hide thumbs Also See for EC-145 T1:

Advertisement

Instruction manual
Scale Fuselage EC-145 T1
450 size
1. INTRODUCTION
Thank you for buying Roban Model products. The 500 size UH-60 scale fuselage is designed as an easy
to use product. Please read the manual carefully before assembling the model, and follow all
precautions and recommendations located within the manual. Be sure to retain the manual for future
reference, routine maintenance and tuning. The scale fuselage is designed for T-REX 500 Helicopter
series use. You can easily put it on your T-REX 500 for new clothing.
Important Note
Roban Model R/C Helicopters are advanced, high-performance devices, built incorporating the latest
technologies. They are not intended as toys, and improper use can potentially lead to serious injury, or
even fatal accidents. We implore you to read this manual thoroughly before operating these models.
Safety should be your utmost priority - not just your own, but also that of others and your surroundings
when piloting Roban Model products.
Liability Disclaimer:
The manufacturer and the seller cannot accept liability for the operation or misuse of this product.
Roban Model R/C helicopters are intended to be used exclusively by experienced adults in legally
sanctioned flying fields. Once sold, we cannot monitor or control the product's operation or usage.
Copyright 2016 – Roban Model Limited

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EC-145 T1 and is the answer not in the manual?

Questions and answers

Summary of Contents for Roban EC-145 T1

  • Page 1 450 size 1. INTRODUCTION Thank you for buying Roban Model products. The 500 size UH-60 scale fuselage is designed as an easy to use product. Please read the manual carefully before assembling the model, and follow all precautions and recommendations located within the manual. Be sure to retain the manual for future reference, routine maintenance and tuning.
  • Page 2 R/C aircraft models. By undertaking the control of these devices, you accept accountability for your actions and their possible consequences. Always aim for caution and responsible handling to minimize any potential risks. Copyright 2016 – Roban Model Limited...
  • Page 3: Contents Of Kit

    Item No. Description Quantity Landing gear struts Screw A2x12 T-Connector Landing gear skids Footstep Screw A2x10 Plywood washer Screw M2x8 Screw A2x12 Screw M2x12 Nut M2 Washer M2 Screw A2x5 Tail wings Elevated tail Copyright 2016 – Roban Model Limited...
  • Page 4 REQUIRED TOOLS / CONSUMABLES Tool No. Tool/Consumable Knife Allen Key Phillips-Screwdriver File Wirecutter 2K Epoxy Cyanoacrylate glue 400 grid sand paper Scissors Copyright 2016 – Roban Model Limited...
  • Page 5: Installation

    4.1. Mount struts with screw A2x12 as shown. 4.2. Glue in the T-Connectors with epoxy glue. 4.3. Mount Glue the skids in as shown. Copyright 2016 – Roban Model Limited...
  • Page 6 4.4. Mount footrest with screws A2x10. 4.5. Remove the tail boom. 4.6. Remove the tail rotor frame. Copyright 2016 – Roban Model Limited...
  • Page 7 4.7. Untighten the screw as shown. 4.8. Assemble the tail boom as shown. Make sure belt isn’t twisted twice. 4.9. Reassemble in main frame. 4.10. Fix tail control rod sleeve with zip ties. Copyright 2016 – Roban Model Limited...
  • Page 8 4.11. Prepare plywood washers as shown. 4.12. Screw washers onto main frame as shown. 4.13. Insert mechanics into body. Copyright 2016 – Roban Model Limited...
  • Page 9 4.14. Make sure to engage the slots in the back. 4.15. Flip tail upwards and tighten screw. 4.16. Adjust properly then drill 1mm holes through Copyright 2016 – Roban Model Limited...
  • Page 10 4.17. Tie down mechanics with screws. 4.18. Mount tail boom cap. 4.19. Glue tail wings into the fuselage with epoxy. Copyright 2016 – Roban Model Limited...
  • Page 11: Spare Part List

    垂尾 450 EC-145 450EC-145 脚 EE450PJ003 landing 架组 gear 450EC-145 脚 450 EC-145 EE450PJ004 踏 foot rest 450 EC-145 450EC-145 尾 EE450PJ005 elevated 波箱 tail 450EC-145 水 450 EC-145 EE450PJ006 印 decal set Copyright 2016 – Roban Model Limited...
  • Page 12 6. ILLUSTRATION OF READY MOUNTED HELICOPTER Specifications: Length: 750mm Heigth: 215mm Width: 170mm Weight: 385g Suitable for TREX450 Belt type mechanics and derivatives. We wish you a lot of fun with the fuselage! Copyright 2024 – www.robanmodel.com Copyright 2016 – Roban Model Limited...

This manual is also suitable for:

Hsb-ee450wbHsb-ee450rHsb-ee450oHsb-ee450ybHsb-ee450sc

Table of Contents