Menu Shortcuts - Lectrosonics DBSM Quick Start Manual

DBSM-A1B1, DBSM/E01-A1B1, DBSMD-A1B1, DBSMD/E01-A1B1
lar Locked mode, "Dark"
locked mode does not persist
through a power cycle.
DispOff
Press MENU/SELto toggle the
DisplayOff feature between 5 and 30
seconds, or set to constantly stay on.
LED Off
From the main menu screen, a quick
press of the UP arrow button turns
the control panel LEDs on. A quick
press of the DOWN arrow button
turns them off. The buttons will be
disabled if the LOCKED option is
selected in the Power Button menu.
Default
Press MENU/SEL to restore the
Default (factory) settings.
About
Press MENU/SEL to display the
model, the firmware version, the
software version and the serial
number.
Turning Transmitter
Power ON
Short Button Press
When the unit is turned off, a short
press of the power button
the unit on in the Standby Mode with
the RF output turned off. This is use-
ful for adjusting settings on the unit
without transmitting.
RF indicator blinks
494.500
-40
-20 0
14
Long Button Press
When the unit is turned off, a long
press of the power button will start
a countdown to turn the unit on with
the RF output turned on. Continue to
hold the button until the countdown
is complete.
Hold
For RF
If the button is released before the
countdown is completed, the unit
will power up with the RF output
turned off.

Menu Shortcuts

From the Main/Home Screen, the
following shortcuts are available:
will turn
Hold
power
button
until the
counter
reaches 3
• LEDs On: Press the UP arrow
• LEDs Off: Press the DOWN
arrow
• Gain Setting: Long press the
MENU button and hold while
adjusting gain up or down us-
ing the arrow keys
• Record: Press the BACK +
UP arrow simultaneously
• Stop Recording: Press the
BACK + DOWN arrow simul-
taneously
NOTE: The recording
shortcuts are only
available from the main/
home screen AND when
a microSDHC memory
card is installed.
LECTROSONICS, INC.
RF indicator not
blinking
503.800
-40 -20 0