Handling - Magtek mDynamo Weatherized Installation And Operation Manual

1 - Introduction
•
Determine which accessories you will need for the device. Table 1-1 provides a list of available
accessories.
•
Determine what software will be installed on the host and how it will be configured. Software can
include operating system, transaction processing software, security software, and so on. Include any
additional support required by the software, such as network connections.
•
Determine how mDynamo Weatherized should be configured, and specify that when you order
devices. MagTek or your reseller can advise. For deep detail about configuration options and how
they affect device behavior, see D998200151 mDynamo Programmer's Manual (COMMANDS).
•
Determine how the solution design will integrate mDynamo Weatherized electrically (see section 2
Electrical Integration for details).
•
Determine how the solution design will integrate mDynamo Weatherized mechanically (see section 3
Mechanical Integration for details).
•
Determine how the solution will be tested and, if appropriate, how it will be certified.
•
Develop an installation procedure. Installing technicians will need solution-specific materials. In
addition, technicians may be supported by incorporating a Maintenance Mode into the host software
for configuration, updates, and diagnostic tests.
•
Determine how the solution will be maintained. See section 5 Maintenance for guidance on
maintaining the mDynamo Weatherized portion of the solution.
•
Determine how the solution will be regularly inspected. Proper inspection will require solution-
specific training, instructions, and visual references for inspecting the entire solution for tampering,
unauthorized added components such as eavesdropping or skimming devices, and so on.
Table 1-1 - Available Accessories
Part Number
21079874
21051548
96700004
1.7

Handling

Proper handling of the device throughout delivery, assembly, shipping, installation, usage,
and maintenance is very important. Not following the guidelines in this document could
damage the device, render it inoperable, and/or violate the conditions of the warranty.
From device delivery through assembly, shipping, installation, usage, and maintenance, the device must
not be exposed to conditions outside the ratings in Appendix A Technical Specifications.
If the device is exposed to cold temperatures, adjust it to warmer temperatures gradually to avoid
condensation, which can interfere with the operation of the device or cause permanent damage.
Upon receiving the device, inspect it to make sure it originated from an authentic source and has not been
tampered with.
mDynamo Weatherized| Insert Secure Card Reader Authenticator | Installation and Operation Manual
MDYNAMO INSERT, WEATHERIZED HIGH TEMP MAGTEK
CABLE, USB-A TO MICRO USB B 5.4MM PLUG, BLACK, 6FT
CLEANING CARD, DOUBLE SIDED
Page 8 of 27 (D998200657-100)
Description