Mechanical Integration; Overview - Magtek mDynamo Weatherized Installation And Operation Manual

3 - Mechanical Integration

3 Mechanical Integration
3.1

Overview

This section provides information and guidelines for designing the mechanical aspects of a solution that
incorporates mDynamo Weatherized. MagTek strongly recommends vetting and testing solution designs
before finalizing and deploying them, to make sure the design meets all requirements (e.g., functional,
legal, security, certification, safety, and so on).
When designing the mechanical portions of a solution that incorporates mDynamo Weatherized, consider
the following:
•
Review section 1.4 mDynamo Weatherized Major Components for an overall introduction to the
device's physical features and what they are called.
•
Review Appendix A Technical Specifications to make sure the device is suitable for the solution.
•
See section 3.2 Dimensions for overall device dimensions.
•
Determine device orientation. Options and constraints are provided in section 3.3 Orientation.
•
Design the solution enclosure front panel. Information about fitting the device into a panel cutout are
in section 3.4 Panel Cutout. When designing, make sure there is adequate clearance around the card
insertion slot to insert a card, and make sure to consider any additional factors for other integrated
devices, such as DynaWave (for details, see D998200265 DynaWave Installation and Operation
Manual).
•
Determine how the device will be mounted. See section 3.5 Mounting for details. Coordinate with
the electrical design team to make sure the panel design, mounting hardware, and solution-specific
installation instructions meet electrical requirements.
•
Review safe handling practices in section 1.7 Handling to make sure the logistical aspects of the
solution design meet the device's handling requirements.
•
Develop solution-specific installation procedures and training materials before distribution to
installation technicians.
•
Review section 5 Maintenance and develop a maintenance procedure and schedule. When installed
in the solution-specific enclosure, the device may require additional maintenance not covered in the
general guidelines provided here.
•
Review any additional requirements from other agencies, such as PCI certification requirements,
building codes, and so on, which may introduce additional constraints to the solution design.
mDynamo Weatherized| Insert Secure Card Reader Authenticator | Installation and Operation Manual
Page 12 of 27 (D998200657-100)