Cd Playing; Basic Operations - Aiwa NSX-999 Operating Instructions Manual

@
o
d
D ISC
CHANGE
5
DIR/PRESET
T
+%=-
l\
ECT PLAY —
BASIC OPERATIONS
1
2
3
4
5
Press the CD button.
CD is displayed.
If you press the button with power off
The power is turned on and CD is displayed.
If a disc is loaded, play begins without any need to press the
<› button (direct play function).
Press the A OPEN/CLOSE button to open the disc
compartment.
Load disc(s) with the label side up.
@To play one or two discs
Place the discs on trays 1 and 2.
@To play three discs
After placing two discs, press the DISC CHANGE button to
rotate the trays. Place the next disc on tray 3.
To load an 8-cm (3-inch) disc, put it onto the inner circle of the
tray.
Press the A OPEN/CLOSE button to close the disc
compartment.
@ Selected disc number
@ Total playing time of the selected disc
@ Total number of tracks on the selected disc
@ Music calendar
Note that only the first 20 tracks are displayed, even if the
disc contains 21 tracks or more.
Press the +- button to start play.
Play begins with the disc on tray 1. All the discs are played once.
~ Number of track being played
@ Playing time of track -
@ Number of track being played flashes.
During playback
The disc number on one of the DISC DIRECT PLAY buttons
flashes and the other buttons light.
A tray which has no disc is skipped and play proceeds to the next
tray. The indicator of the skipped tray number goes out in the
display.
To stop play
Press the button.
To stop and open the tray at the same time, press the A OPEN/
CLOSE button.
To pause
Press the II button.
The II button flashes.
To resume play, press it again.
28