Programmed Play - Aiwa NSX-999 Operating Instructions Manual

I
PRGM
'%
2
DISC
rDIRECT PLAY1
O@@
b
@ @
5
Q
"REcT'ON + 'RESET
o
PROGRAMMED PLAY
The CD player has a built-in memory function that allows play of up
to 30 tracks over three discs in any order.
1
2
3
4
5
Press the PRGM button in stop mode.
The PRGM indicator flashes in the display.
Press one of the DISC DIRECT PLAY buttons to
select a disc.
The selected disc is indicated in red in the display.
Go to the next step when the tray stops rotating.
Press the numeric buttons and the +10 button to
program a track.
Example:
@To select the 6th track, press the 6 button.
@To select the 16th track, press the +1O button and then
press the 6 button within 4 seconds.
@To select the 20th track, press the +1O button twice and
then press the O button within 4 seconds.
When each track selected, the display @is shown. In a few
seconds, the display changes to @.
@ Program number
@ Disc number
@ Selected track number
The display changes after a few seconds.
@?Total playing time of the selected tracks
@ Total number of selected tracks
Repeat steps 2 to 3 to program other tracks.
Press the <F button to start play.
To check the program
Each time the + DOWN or * UP button is pressed before
playing, a disc number, a track number, and a program number
will
be displayed.
To clear the program
Press the CLEAR button before playing or press the A OPEN/
CLOSE button.
To add tracks to the program
Before playing, carry out steps 2 and 3. The track will be pro-
grammed after the last track.
To change the programmed tracks
Clear the program and carry out all the steps again.
m
The DISC CHANGE button does not operate during programmed
play.
During programmed play, the remaining time is not displayed
when the CD EDIT/REMAIN button is pressed.
Random play cannot be combined with programmed play.
34