Cd Playing; Basic Operations - Aiwa Z-M260 Operating Instructions Manual

CD PLAYING

BASIC OPERATIONS

LOADING DISCS
Press the CD button, then press the fOPEN/
CLOSE button to open the disc compartment. Load
disc(s) with the label side up.
To load one or two discs, place the disc(s) on the tray(s) in the
direction of the arrows as illustrated.
Tray
number
To load three to five discs, press the DISC CHANGE button to
rotate the trays after placing two discs. Place the next disc on
empty tray. Each time the DISC CHANGE button is pressed, the
trays rotate and one disc can be placed.
After placing the discs, press the f
close the disc compartment.
The display shows the information of the disc to be played.
Total playing time
Total number of tracks
11
ENGLISH
f f f OPEN/CLOSE button to f
Tray number of the
disc to be played
PLAYING DISCS
Load discs.
To play all discs in the disc compartment, press
the k button.
All discs are played once.
Elapsed playing time
Number of track being played
To play one disc only, press one of the DISC DIRECT
PLAY buttons.
The disc with the selected tray number is played once.
Only the selected disc tray
number is surrounded.
To play with the remote control
Press the DIRECT button, then press one of the numeric buttons
1 to 5 within 3 seconds to select a disc.
To stop play, press the a button.
To pause play, press the b button. To resume play, press
again.
To search for a particular point during playback, keep the
c or d button pressed and release the button at the desired
point.
To skip to the beginning of a track during playback, press
the c or d button repeatedly.
To remove discs, press the fOPEN/CLOSE button.
You can only remove the two discs that face you. When the
disc(s) to be removed does not face you, press the DISC
CHANGE button repeatedly.
To start play when the power is off (Direct Play Function)
Press the CD button. The power turns on and play of the loaded
disc begins.
To replace discs before play, press the fOPEN/CLOSE button
to open the disc compartment.
To check the remaining time
Press the EDIT/CHECK button on the remote control during play.
The amount of time remaining until all tracks finish playing is
displayed. To restore the playing time display, press the EDIT/
CHECK button.
Selecting a track with the remote control
1 Press the DIRECT button, then press one of the numeric
buttons 1 to 5 within 3 seconds to select a disc.
2 Press the numeric buttons and the +10 button to select a
track.
Example:
To select the 25th track, press the +10, +10 and 5 buttons.
To select the 10th track, press the +10 and 0 buttons.
The selected track starts to play and play continues to the
end of that disc.