Chapter 3 Normal Mode And User Mode; Normal Mode - Dascom DC-240 User Manual

Dascom DC-240

CHAPTER 3 NORMAL MODE AND USER MODE

You can change between Normal and User Modes when the Printer is operating.
This section outlines the differences between these two modes and how to switch from one to the
other.

3.1 Normal Mode

Normal mode: After start up, the Printer goes into Normal Mode in which the Printer can print cards.
In this mode, after you press the
indicated by a series of "*" marks. Each "*" represents 20% remaining:
In this mode, after you press the
Heater unit and Print Head:
Normal Mode Message List:
Initialize
Ready
Printing
Power Save Mode
▲
button for 1 second, the OLED displays the unused ribbon
RBN E[*
▼
button for 1 second, the OLED displays the temperatures of the
TPH Temp： 43℃
Env Temp： 38℃
The printer undergoes system diagnostic and initialization.
Cards remaining in Printer from a previous irregular session will
be ejected.
The printer is awaiting host requests or commands.
The printer is in a printing session.
The printer is in an energy saving state.
20
]F
User Guide V1.0