Dascom DC-240 User Manual page 40

Dascom DC-240 User Guide V1.0
Black A
Edit rea
Area Select->Valid Area：
Whole Card: All of the black content will be printed by K-Ribbon.
Defined: Define the area that black content will be printed by K-Ribbon.
Undefined: Define the area that black content will NOT be printed by K-Ribbon.
Parameter:
Unit: mm or inch
X Offset: X coordinates of selected area.
Y Offset: Y coordinates of selected area.
Width: Width of selected area.
Height: Height of selected area.
Operation:
Select: Select area. In this area content will be printed or NOT printed by K-Ribbon.(According to Valid
Area)
Draw: Draw area. In this area content will be printed or NOT printed by K-Ribbon.(According to Valid
Area)
Delete: Delete a selected area.
Clear: Delete all area that has been drawn.
14