Dascom DC-240 User Manual page 18

Dascom DC-240
WARNING
The lower part of the Top Access Cover, the printer internal heat roller section, and
the thermal head section become very hot. Ensure you do not touch these three
locations.
• The cooling fan is always running for cooling inside the printer. This is not a
malfunction.
• Contact your reseller if there is a current leak.
• The printer may cause static, flickering or interrupt reception of televisions or
radios if they are too close to the printer.
• The lower part of cover top, internal heating platen and printer head may
produce high temperature, please don't touch these three parts.
Under the following conditions images on cards may deteriorate or cards may
warp after printing:
• The surface of the card is in contact for an extended period with a vinyl card
holder or synthetic leather or other material that contains a plasticizer.
• The surface of the card is exposed to direct sunlight for an extended period.
• The card is repeatedly rubbed against a hardobject such as a key.
• The faces of two cards are in contact for an extendedperiod.
• The card is kept for an extended period in a very hot location such as a car
parked in the sun.
• The card is bent, or used with excessive force.
If a card with a magnetic strip is placed near a magnetic source, the data on
the strip could become corrupted.
Additionally, if an IC chip card is bent, or used with excessive force, the IC chip
may be damaged.
4
User Guide V1.0