Table of Contents Introduction .................. 1 e-FOB Operation and Features - Standard ........ 2 e-FOB Operation and Features - Cargo ........2 Additional System Features ............3 Light Activation ................ 3 2nd Unlock Output ..............3 Auxiliiary Output ..............3 2nd Auxiliary Output ..............
Introduction This manual provides the necessary information for the proper installation and use of TriMark’s e-FOB transmitter/receiver system. Basic functions of the system include: • Locking and unlocking entry and compartment doors • Light activation • Panic mode (standard) • Auxiliary functions The e-FOB system includes: •...
e-FOB Operation and Features—Standard Lock button Horn button button Unlock button Button Function Lock Locks all entry doors and arms security system. Unlocks doors and disarms security system. Also Unlock activates the porch light. Activates panic mode when pressed and held for 2 Horn button seconds.
Additional System Features Light Activation When the alarm is armed, the parking lights and headlights flash. With an unlock instruction; the dome light stays illuminated for 30 seconds and the parking and headlights flash. 2nd Unlock Output Press and release the Unlock (Entry Unlock) button twice for a pulse output.
There is a 5 second delay before the system will recognize a security input. If a security input (door ajar switch, motion sensor, glass break sensor, etc.) is triggered while the alarm is armed, the security input must be turned off and then on before the alarm is activated. The horn/ siren chirps 3 times if a security input is active when the alarm is armed.
Remote transmitter FOBs, batteries, and other equipment subject to normal wear and deterioration may need to be replaced periodically by dealer and/or end user and are not covered by this warranty. TriMark will not be liable for indirect, special, incidental or consequential damages.
Need help?
Do you have a question about the e-ASK and is the answer not in the manual?
Questions and answers