First Time Installation - Beko 15WLP530HID Operating Instructions Manual

Integrated digital hd ready colour televisions
Table of Contents

Advertisement

ADDITIONAL INFORMATION
Please note that Encrypted channels may
not be stored after scanning in the Digital
TV channels. If this is the case then you will
need to rescan the channels again but this
LIST SCRAMBLED
time change the
CHANNELS
AUTO
ON
from
to
:
1
Press Menu.
2
Select Features.
3
Select Digital Features.
4
Select User Interface Options.
5
List Scrambled Channels will show.
Change “Auto” setting to “ON”
6
Press Exit button to exit the Menu.
You will need to rescan the digital TV channels:
1
Press Menu.
2
Select Setup.
3
Select Auto Tuning and press the OK
button to start the channel scan and this
time store the Scrambled channels.
6.3.2-Manual tuning of channels and
storing in the memory
Press MENU button in digital mode
and MAIN MENU will be displayed.
Select SETUP tab with down
movement button and confirm with
the OK button. SETUP menu will be
displayed. Select MANUAL TUNING
tab and confirm by pressing the OK button.
Manual Search Parameters menu will be
displayed.
Manual Search Parameters
Channel
21
Frequency
474000
Update of Channel List
Add channels
Change
Start
Back
Highlight the Channel tab by means
of Up/Down buttons and directly
enter the frequency number of the
channel you want to search, if you
know, by using the numeric keys on
the remote control. If you don’t know
the frequency number, you can scan
frequencies by using the Left/Right
movement buttons. After entering
the frequency you want to search, highlight
Update of Channel List tab with Up/
Down movement buttons and select either
one of Add channels, Replace channels
or Erase channel list items, then press
OK button to start searching. Channels will
be searched or changed according to the
search method you have chosen.
Channel Search
Waiting for signal...
Service found:
TV: 0
Other: 0
Radio: 0
Stop Search
Add Channels : With this option, the new
channels in the frequency which is desired to
be manually searched will be scanned and
added to the existing channel list.
Replace Channels : With this option, you
can update the existing channel list with the
modifications made by the broadcasting
enterprise.
Erase Channel List :With this option,
you can delete all channels in the existing
channel list to store only the new channels in
the desired frequency into the memory.
Note: You can also access Manuel Tuning
menu from the System Menu submenu
under Digital Features menu.

6.3.3-First Time Installation

If you select this function, all channel
information in the memory will be deleted.
The OSD where country selection shall be
made is displayed and channel search is
made automatically. First, digital channels
are searched. You can start Analog channel
search by pressing the OK button after the
digital channel search is completed.
6.3.4-Program Table
With the program table, you can see the
stored channels in a list, switch between
TV channels and Radio channels or create
your favorite channels list for 6 TV and Radio
channels according to your preference.
Page 12

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents