Turning On The Tv And Setting The Channels; Performing Digital Tunings - Beko 15WLP530HID Operating Instructions Manual

6.2-Turning on the TV and
Setting the Channels
When you turn on your television for the
first time, FIRST TIME INSTALLATION
CHECK AERIAL CABLE IS CONNECTED.
PRESS OK KEY TO CONTINUE message
is displayed. If the antenna connections
are correct, press OK button to continue.
COUNTRY SELECTION menu will be
displayed. Select the country by using Up/
Down, Right/Left movement buttons
and press OK button to start the auto
programming. Channel Search menu
will be displayed and Digital channels are
scanned and stored in the memory.
After completion of the searching process
Channel Search Results menu will be
displayed. Number of TV and Radio channels
already detected and stored in the memory
at the end of the search process will be
displayed in this menu. Finish the Digital
channel searching process by pressing the
OK button.
PRESS OK KEY TO START ANALOG
SEARCH PRESS MENU KEY TO EXIT
message will be displayed. You can make
Analog channel tuning with OK button
or finish the searching process by pressing
the MENU button.

6.3-Performing Digital Tunings

You can either tune the Digital programs
automatically or manually and store them in
your television.
6.3.1-Automatic Tuning of Channels
and Storing in the Memory
Press AV button on your remote
control, select DIGITAL tab from the
SOURCE menu by using Up/Down
movement buttons and confirm by
pressing the OK button. Your TV
will switch to Digital mode. Press
MENU button, MAIN MENU will be
displayed. Select SETUP tab with
down movement button and confirm
with the OK button. SETUP menu
will be displayed.
SETUP
AUTO TUNING
MANUAL TUNING
FIRST TIME INSTALLATION
SELECT
Select AUTO TUNING tab and
confirm by pressing the OK button.
COUNTRY SELECTION menu will
be displayed.
COUNTRY SELECTION
BELGIUM
CZECH REP.
DANMARK
DEUTSCHLAND
ELLADA
ESPANA
FRANCE
HUNGARY
IRELAND
ITALIA
NETHERLANDS
Select the country by using Up/
Down, Right/Left movement
buttons and press OK button to start
the auto programming. Channel
Searchmenu will be displayed and
Digital channels are scanned and
stored in the memory.
Channel Search
Waiting for signal...
Service found:
TV: 0
Note: You can also access Auto Tuning
menu from the System Menu submenu
under Digital Features menu.
11
MENU
BACK
NORGE
ÖSTERREICH
POLSKA
PORTUGAL
SCHWEIZ
SUOMI
SVERIGE
TÜRKİYE
U.K.
..........................
START AUTOPROGRAMMING
BACK
Other: 0
Radio: 0
Stop Search