Making A Gateway Call Through The Access Point Transceiver - Icom ID-52A PLUS Manual

4
Access Point mode operation

■ Making a Gateway call through the Access point transceiver

In this section, set a Remote D-STAR transceiver you are going to operate.
L Read the Remote D-STAR transceiver's instruction manual for setting details.
NOTE: While in the Access Point mode, you can make a Gateway CQ call or a call to an individual station
using call sign routing.
L You can select the "Local CQ," but cannot make a call.
Example: When setting the operating frequency to 430.850 MHz,
and making a Gateway CQ call.
Remote D-STAR
transceiver*
Operating frequency:
430.850 MHz
UR: /JP1YIUA
MY: JA3YUA
* Any model as long as the transceiver is D-STAR capable.
Only one D-STAR transceiver can use the Access Point at a same time.
Access Point
transceiver:
Operating frequency:
430.850 MHz
MY Call Sign:
JL3YRP
Access Point
Enter "JL3YRP D"
to the RS-MS3W/
RS-MS3A.
25
Internet Internet
Hamacho 430
(JP1YIU A)
Other station