Icom ID-52A PLUS Manual page 19

3
Terminal mode operation
■ Operating in the Terminal mode
D Setting "TO" (Destination) to make a call
Example: Making a Gateway CQ call
1. Push [ENT].
• Displays the TO SELECT screen.
2. Select "Gateway CQ."
3. Select the repeater group where your destination
repeater is listed.
(Example: "13: Japan")
4. Select the destination repeater.
(Example: "Hirano/Icom")
5. Hold down [PTT] to transmit.
• While transmitting, the TX/RX indicator lights orange.
L While receiving a signal through the Internet, you
cannot transmit.
6. Release [PTT] to receive.
L If you cannot receive a reply, see page 32 to read
the tips to solve the problem.
19