Battery Installation - LEXIBOOK NIMITZ GT2000 Instruction Manual

BATTERIES
1. NIMITZ works with 3 AA type alkalines batteries.
2. This toy must only be used with the specified batteries.

BATTERY INSTALLATION

1. Open the battery compartment door located at the back of the unit.
2. Install the 3 AA alkaline batteries and follow the polarity as shown inside the battery compartment.
3. Close the battery compartment.
4. When new batteries are inserted, use a sharp object (tooth pick for example) to press the RESET button located
at the back of the game.
5. Switch On the game
Do not use rechargeable batteries. Do not charge the batteries. Take the batteries out of the unit before charging
them. Charge the batteries only under adult supervision. Do not mix different types of batteries, or new and old
batteries. Batteries are to be inserted with the correct polarity. Exhausted batteries should be removed. Do not
short-circuit the supply terminals. Use only specified batteries. Do not throw batteries into fire. If the toy is not
being used for a length of time, remove the batteries.
When the sound is weak or when the game does not react, please think about changing the batteries.
If your unit shows some malfunction, take the batteries out of the compartment and place them again, this operation will RESET your product.
THE KEYS
Player 1 and Player 2 ( only the 4 lower buttons ).
1: ON/OFF : To switch the game On and Off.
2: VOLUME : To adjust the volume level.
3: NEW GAME : To start a new game.
4: WAR : To start a new battle with less than 5 vessels.
5: CANCEL : To be pressed during the game, to cancel a coordinate that has already been played, before pressing ENTER. Also when you save your fleet
positions, you can cancel the selection of the previous vessel.
6 / 7: LEFT / RIGHT : To select the information on the LCD screen.
8: ENTER / FIRE : To enter a position or to fire.
GT2000 2
English
28/05/03, 15:48:29