Amplifier Output Monitor ("3. Output Monitor"); Amplifier Output ("3. Output Monitor"); Device Setup ("4. Device Setup"); Device Id Setting ("4. Device Setup" ➝ "Device Id") - Yamaha ACD1 Reference Manual

Panel operations
Amplifier output monitor ("3. Output Monitor")
This indicates the output level of the amp connected to the ACD1.
■ Amplifier output ("3. Output Monitor")
Displays the output level for each channel of the specified amplifier.
Parameter
Amp ID
Level

Device setup ("4. Device Setup")

Here you can make settings to identify the ACD1 connected to the
network and the amplifiers connected to the ACD1.
■ Device ID setting ("4. Device Setup" ➝ "Device ID")
Specifies the ACD1's Device ID. Set the Device ID so that it does not con-
flict with another ACD1 etc. connected to the network.
Parameter
Device ID
• If you press and hold down this button for three seconds or longer while the HOME screen is displayed, the screen will
NOTE
appear.
■ View ACD1 name ("4. Device Setup" ➝ "Device Label")
Displays the name of the ACD1 assigned by Amp Editor.
• This shows up to 14 alphanumeric characters. The fifteenth and
NOTE
following characters will not be shown.
• Characters not appearing in the character list at the end of this
manual are displayed as "
12
ACD1 Reference Manual
Range
00–39 Selects the ID of the amp whose output level you want to view.
0 Nothing will appear in the meter if the level is below 0 dBu.
1 0–6 dBu
2 6–16 dBu
3 16–22 dBu
4 22–28 dBu
5 28–34 dBu
6 34–41 dBu
7 41 dBu–
Range
000–255 Selects the ACD1's Device ID.
~
."
å 3 .Output Monitor
Amp ID:
A~B~
Explanation
å 4 .Device Setup
Device ID
Device ID
Explanation
Device Label
[Rack L-ACD1
01
å
001
å
]