Introduction; About The Documentation; Supported Amplifiers; Setup - Yamaha ACD1 Reference Manual

Introduction

About the documentation

This document explains mainly the operation and specifications of the ACD1 amplifier control device itself. When
using the ACD1, you will also need to consult various manuals other than this document.
● Manuals other than this document
ACD1 Owner's Manual (printed)
Amp Editor Installation Guide (PDF)
Amp Editor Owner's Manual (PDF)
• Please use Amp Editor Version 1.1 or later.
NOTE
PDF manuals and Amp Editor can be downloaded from the following URL.
http://www.yamahaproaudio.com/downloads/
• In order to view the downloaded manuals, Adobe Reader must be installed in your computer. If you don't have
NOTE
Adobe Reader, please access the Adobe Corporation's website at the following URL, and download Adobe Reader
(free of charge).
http://www.adobe.com/
Supported amplifiers
As of September 2009, the following amplifiers support connection with the ACD1.
• XP series : XP7000, XP5000, XP3500, XP2500, XP1000
• XM series : XM4180, XM4080
• XH series : XH200
• PC-N series : PC9501N, PC6501N, PC4801N, PC3301N, PC2001N, PC9500N, PC4800N, PC3300N
• Tn series : T5n, T4n, T3n
* For the most recent information, refer to the following URL.
http://www.yamahaproaudio.com/

Setup

For details on setting up the ACD1 and Amp Editor, refer to the "Amp Editor Owner's Manual."
The "Amp Editor Owner's Manual" can be downloaded from the download page of the following website.
http://www.yamahaproaudio.com/downloads/
Primarily explains initial connections
Explains the installation procedure for Amp Editor, and the uninstalla-
tion procedure
Explains how to set up the ACD1 and Amp Editor and to use Amp Editor
3
ACD1 Reference Manual