Control With Hdmi Function; Making Control With Hdmi Connections - Pioneer Elite SC-37 Operating Instructions Manual

08

Control with HDMI function

Chapter 8:
Control with HDMI function
Important
• The procedure for setting the receiver operation
mode differs for the remote controls included with
the SC-37 and SC-35. For the SC-37's remote control,
set the remote control operation selector switch to
RECEIVER. For the SC-35's remote control, press the
RECEIVER
button. When "set the remote control to
the receiver operation mode" is indicated in these
instructions, use the respective procedure described
above.
Synchronized operations below with a Control with
HDMI-compatible Pioneer TV or Blu-ray disc player or
with a component of another make that supports the
Control with HDMI functions are possible when the
component is connected to the receiver using an HDMI
cable.
• The receiver's volume can be set and the sound can
be muted using the TV's remote control.
• The receiver's input switches over automatically
when the TV's channel is changed or a Control with
HDMI-compatible component is played.
• The receiver's power is also set to standby, when the
TV's power is set to standby.
Important
• With Pioneer devices, the Control with HDMI
functions are referred to as "KURO LINK".
• You cannot use this function with components that
do not support Control with HDMI.
• We do not guarantee this receiver will work with
Pioneer Control with HDMI-compatible components
or components of other makes that support the
Control with HDMI function. We do not guarantee
that all synchronized operations will work with
components of other makes that support the Control
with HDMI function.
• Use a High Speed HDMI
use the Control with HDMI function. The Control
with HDMI function may not work properly if a
different type of HDMI cable is used.
• For details about concrete operations, settings, etc.,
refer to also the operating instructions for each
component.
72
En
®
cable when you want to
Making Control with HDMI
connections
You can use synchronized operation for a connected TV
and up to five other components.
• Be sure to connect the TV's audio cable to the audio
input of this unit. When the TV and receiver are
connected by HDMI connections, if the TV supports
the HDMI Audio Return Channel function, the sound
of the TV is input to the receiver via the HDMI
terminal, so there is no need to connect an audio
cable. In this case, set TV Audio at HDMI Setup to
via HDMI (see HDMI Setup on page 73).
For details, see Connecting your TV and playback
components on page 29.
Important
• When connecting this system or changing
connections, be sure to switch the power off and
disconnect the power cord from the wall socket.
After completing all connections, connect the power
cords to the wall socket.
• After this receiver is connected to an AC outlet, a 2
second to 10 second HDMI initialization process
begins. You cannot carry out any operations during
initialization. The HDMI indicator on the display unit
blinks during initialization, and you can turn this
receiver on once it has stopped blinking.
• To get the most out of this function, we recommend
that you connect your HDMI component not to a TV
but rather directly to the HDMI terminal on this
receiver.
• While the receiver is equipped with six HDMI inputs
(BD, HDMI 1 to 5), the Control with HDMI function
can only be used with up to three DVD or Blu-ray disc
players or up to three DVD or Blu-ray disc recorders.
• The Control with HDMI function can be used with a
TV connected to the HDMI OUT 1 terminal, but not
with a TV connected to the HDMI OUT 2 terminal.