Multi Operation And System Off; Programming A Multi-Operation Or A Shutdown Sequence - Pioneer Elite SC-37 Operating Instructions Manual

Controlling the rest of your system (In case of SC-37)
remote control to set up and listen to a CD on the
receiver, and then use the remote control to rewind a
tape in your VCR while you continue to listen to your CD
player.
When direct function is on, any component you select
(using the input function buttons) will be selected by both
the receiver and the remote control. When you turn direct
function off, you can operate the remote control without
affecting the receiver.
1 While pressing MULTI OPERATION, press HOME
MENU.
The remote display shows SETUP MENU.
Use / to select 'DIRECT FUNC', then press ENTER.
2
The remote display prompts you for the button of the
input function you want to control.
3 Press the input function button for the component
you want to control, then press ENTER.
Use / to switch direct function ON or OFF, then
4
press ENTER.
The remote display shows OK to confirm the setting.

Multi Operation and System Off

The Multi Operation feature allows you to program a
series of up to 6 commands for the components in your
system. For example, you could turn on your TV, turn on
your DVD player and start playing the loaded DVD using
only two buttons on the remote control.
Similar to multi operations, System Off allows you to use
one button to stop and switch off a series of components
in your system at the same time.
Programming a multi-operation or a
shutdown sequence
Set the remote control operation mode selector switch to
RECEIVER when you want to program this receiver's
operations, to SOURCE when you want to program
operations of other components.
1 While pressing MULTI OPERATION, press HOME
MENU.
The remote display shows SETUP MENU.
Use / to select 'MULTI OPERATE' or 'SYSTEM
2
OFF' from the menu and press ENTER.
If you selected Multi Operation (MULTI OPERATE), the
remote display prompts you for an input function button.
If you selected System Off (SYSTEM OFF), go to step 4.
Note
1 You can't use direct function TUNER, HMG NET RADIIO, ADAPTER and iPod USB.
2 • Before Multi Operation and System Off will work correctly, you must setup the remote to work with your TV and other components (see
Setting the remote to control other components on page 84 for more on this).
• Some units may take some time to power up, in which case multiple operations may not be possible.
• Power on and off commands only work with components that have a standby mode.
• Up to 5 commands can be programmed for System Off.
1
2
3 Press the input function button for the component
that will start the multi-operation, then press ENTER.
For example, if you want to start the sequence by
switching on your DVD player, press DVD.
Use / to select 'EDIT CODE', then press ENTER.
4
To erase any previously stored multi-operations (or
shutdown sequences) select CLEAR CODE above.
Use / to select a command in the sequence, then
5
press ENTER.
If this is the first command in the sequence, select 1st
CODE. Otherwise, simply choose the next command in
the sequence. PRESS KEY flashes after you press ENTER.
6 If necessary, press the input function button for the
component whose command you want to input.
This is only necessary if the command is for a new
component (input function).
7 Select the button for the command you want to
input.
The following remote control commands can be selected:
MAIN
RECEIVER SOURCE
ZONE2 3
MULTI
OPERATION
BDR
BD DVD DVR HDMI
NET RADIO
TV CD HMG ADAPTER
USB OPTION
iPod TUNER 1 2
MULTI CH
PHONO IN VIDEO CD-R
INPUT SELECT LIGHT
AUX
SOURCE
TV RECEIVER
CH VOL
VOL
TV CONTROL
INPUT MUTE MUTE
AUDIO VIDEO
PARAMETER PARAMETER
• You don't need to program the receiver to switch on
or off. This is done automatically.
With Pioneer components, you don't need to:
• program the power to switch off in a shutdown
sequence (except DVD recorders);
These take priority in multi operations (not shutdown).
TV CONTROL
INPUT MUTE MUTE
AUDIO VIDEO
PARAMETER PARAMETER
TUNE
TOOLS
LIST
TOP MENU T.EDIT
BAND GUIDE
PRESET PRESET
ENTER
CATEGORY RETURN
HOME
MENU
TUNE
iPod CTRL PTY SEARCH
STATUS PHASE CTRL CH LEVEL
THX MPX PQLS MEMORY
AUTO/ALC/
STANDARD ADV SURR
DIRECT STEREO
PGM MENU
SIGNAL SEL SLEEP DIMMER AUDIO
A.ATT SBch MCACC INFO
DISP
HDMI OUT
CH
D.ACCESS CLASS
ENTER
CLR
10
87
En