Sirius Radio Messages - Pioneer Elite SC-37 Operating Instructions Manual

Audio/video multi-channel receiver
Hide thumbs Also See for Elite SC-37:
Table of Contents

Advertisement

13
Additional information
Status messages
Check Antenna
Loading
No Signal
Off Air
CH Unauthorized
CH Unavailable
– – – – – – – –
Upgrade XM Tuner
XM Power Error

SIRIUS radio messages

Status messages
Antenna Error
132
En
Cause
The XM antenna is not connected to the XM Mini-
Tuner Home Dock or the XM antenna cable is
damaged.
The XM Mini-Tuner is acquiring audio or program
information from the XM satellite signal. This
message can also occur in weak XM signal
conditions.
Note that this receiver may not respond to some
buttons while this message is displayed.
The XM Mini-Tuner is not receiving the XM satellite
signal. Something may be blocking the XM
antenna's view of the satellites or the antenna is not
properly aimed.
The XM channel you selected is not currently
broadcasting.
You selected an XM channel that is blocked or
cannot be received with your XM subscription
package.
The selected channel is not available. The channel
may have been reassigned to a different channel
number.
This message may occur initially with a new radio or
a radio that has not received XM's signal for an
extended period.
No artist name or song title is available for this
selection.
The connected XM CNP-1000 is incompatible. This
receiver features advanced technology that is
designed for use with the XM Mini-Tuner.
A short-circuit occurring in the antenna or
surrounding antenna cable.
Cause
The SIRIUS antenna is not properly
connected.
Action
Check that the XM antenna is securely connected to
the XM Mini-Tuner Home Dock and check the
antenna cable for damage. Replace the XM antenna
if the cable is damaged.
This message should disappear in a few seconds in
good signal conditions.
If you see this message often, reposition the XM
antenna for better signal reception.
Use the Antenna Aiming option to optimize the
antenna position.
Check for antenna obstructions and reposition the
XM antenna to get better signal reception. Use the
Antenna Aiming option to optimize the antenna
position.
See instructions supplied with the XM Mini-Tuner
and Home Dock for antenna installation
information.
Check back later.
Consult the latest channel guide at
www.xmradio.com for the current list of channels.
For information on receiving this channel, visit
www.xmradio.com or contact XM Satellite Radio at
1-800-967-2346.
Consult the latest channel guide at
www.xmradio.com for the current list of channels.
For cases of a new radio or a radio that has not
received XM's signal for an extended period, allow
the radio to receive the XM satellite signal for at least
5 minutes and then try to select the channel again.
No action required.
Contact XM Listener Care (1-800-967-2346) and ask
about upgrading your XM CNP-1000 to an XM Mini-
Tuner.
Have this receiver's model name and CNP-1000 XM
Radio ID number ready beforehand, and explain that
this receiver is displaying the message Upgrade XM
Tuner.
If you already have an XM Mini-Tuner connected and
you see this message, turn off this receiver, make
sure the XM Mini-Tuner is properly seated in the
Mini-Tuner Home Dock, and then turn this receiver
on again. If the message reappears, contact XM
Listener Care and explain the issue that you're
experiencing and the corrective actions you've tried.
Make sure that there is nothing unusual with the
antenna or antenna cable. Switch the power off,
then back on again.
Action
Check that the antenna cable is attached securely.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Elite sc-35

Table of Contents