Table of Contents
Advertisement
08
About the Control with HDMI function
Synchronized operations below with a Control with HDMI-compatible Pioneer TV or Blu-ray Disc player are pos-
sible when the component is connected to the receiver using an HDMI cable.
! The receiver's volume can be set and the sound can be muted using the TV's remote control.
! The receiver's input switches over automatically when the TV's input is changed or a Control with HDMI-
compatible component is played.
! The receiver's power is also set to standby, when the TV's power is set to standby.
Important
! With Pioneer devices, the Control with HDMI functions are referred to as "KURO LINK".
! You cannot use this function with components that do not support Control with HDMI.
! We only guarantee this receiver will work with Pioneer Control with HDMI-compatible components. However,
we do not guarantee that all synchronized operations will work with components that support the Control with
HDMI function.
! Use a High Speed HDMI
®
/
TM
cable when you want to use the Control with HDMI function. The Control with
HDMI function may not work properly if a different type of HDMI cable is used.
! For details about concrete operations, settings, etc., refer to also the operating instructions for each
component.
Making Control with HDMI connections
You can use synchronized operation for a connected TV and other components.
! Be sure to connect the TV's audio cable to the audio input of this unit. When the TV and receiver are connected
by HDMI connections, if the TV supports the HDMI ARC (Audio Return Channel) function, the sound of the
TV is input to the receiver via the HDMI OUT 1 terminal, so there is no need to connect an audio cable. In this
case, set ARC at HDMI Setup to ON (see
HDMI Setup
For details, see
Connecting your TV and playback components
Important
! When connecting this system or changing connections, be sure to switch the power off and disconnect the
power cord from the wall socket. After completing all connections, connect the power cords to the wall socket.
! After this receiver is connected to an AC outlet, a 2 second to 10 second HDMI initialization process begins.
You cannot carry out any operations during this process. The HDMI indicator in the front panel display blinks
during this process, and you can turn on this receiver once it has stopped blinking. When you set the Control
with HDMI to OFF, you can skip this process. For details about the Control with HDMI feature, see
HDMI function
on
page 82
.
! To get the most out of this function, we recommend that you connect your HDMI component not to a TV but
rather directly to the HDMI terminal on this receiver.
! The Control with HDMI function works on the TV connected to the HDMI OUT 1 terminal. It does not work on
TVs connected to the HDMI OUT 2 or HDMI OUT 3 terminals.
on
page 83
).
on
page 37
.
Control with
HDMI Setup
You must adjust the settings of this receiver as well as the connected Control with HDMI-compatible compo-
nents in order to make use of the Control with HDMI function. For more information see the operating instruc-
tions for each component.
1
Press MAIN RECEIVER to switch the remote control to the receiver operation mode, and
then press HOME MENU.
2
Select 'System Setup', then press ENTER.
3
Select 'HDMI Setup', then press ENTER.
4
Select the 'Control' setting you want.
Choose whether to set this unit's Control with HDMI function ON or OFF. You will need to set it to ON to use the
Control with HDMI function.
When using a component that does not support the Control with HDMI function, set this to OFF.
! ON – Enables the Control with HDMI function. Set Control Mode, ARC and PQLS in the subsequent setting
items to the desired values.
Also, by setting this to ON, the Sound Retriever Link and Stream Smoother Link functions can be operated
automatically by connecting a player supporting the respective functions. See
page 87
for details on Sound Retriever Link,
Smoother Link.
! OFF – The Control with HDMI is disabled. The Control Mode, ARC and PQLS functions in the subsequent
setting items cannot be used.
5
Select the 'Control Mode' setting you want.
Choose whether you want to enable synchronized operations.
! ON – Enabled for the synchronized operations.
! OFF – The synchronized operations disabled.
6
Select the 'ARC' setting you want.
When a TV supporting the HDMI ARC (Audio Return Channel) function is connected to the receiver, the sound of
the TV can be input via the HDMI OUT 1 terminal.
After setting the ARC, some time may be required for the connected device to be recognized and the sound to be
produced.
! ON – The TV's sound is input via the HDMI terminal.
! OFF – The TV's sound is input from the Audio input terminals other than HDMI inputs.
7
Select the 'PQLS' setting you want.
Choose whether to set this unit's PQLS function AUTO or OFF.
For details about PQLS function, see
Setting the PQLS function
! AUTO – PQLS is enabled. A precision quartz controller in this receiver eliminates distortion caused by timing
errors (jitter), giving you the best possible digital-to-analog conversion when you use the HDMI interface. This
is valid as an HDMI function for PQLS-compatible players.
! OFF – PQLS is disabled.
83
Control with HDMI function
Setting the Audio options
Setting the Video options
on
page 89
for details on Stream
on
page 85
.
on
Hide quick links:
Advertisement
Table of Contents
