Connecting An Ipod; Connecting A Usb Device; Connecting A Usb Device For Advanced Mcacc Output - Pioneer Elite SC-37 Operating Instructions Manual

03 Connecting your equipment

Connecting an iPod

This receiver has a dedicated iPod terminal that will allow
you to control playback of audio content from your iPod
using the controls of this receiver.
• Switch the receiver into standby then use the
supplied iPod cable to connect your iPod to the iPod/
iPhone/USB terminal on the front panel of this receiver.
• It is also possible to connect using the cable included
with the iPod, but in this case it is not possible to view
pictures via the receiver.
• For the cable connection, also refer to the operating
instructions for your iPod.
• For instructions on playing the iPod, see Playing an
iPod on page 48.
TUNER EDIT BAND AUTO SURR/ALC/
STREAM DIRECT
HDMI 5
VIDEO CAMERA

Connecting a USB device

It is possible to play audio and photo files by connecting
USB devices to this receiver. It is also possible to connect
a USB keyboard (US-international layout) to the receiver
to enter text in the following GUI screens.
• Change the input name in the Input Setup menu
(page 45).
• Add names to radio station presets (page 52).
• SC-35 only: Enter Internet radio station URLs
(page 56).
Note
1 This receiver does not support a USB hub.
2 The various parameters and the reverb characteristics data used for display on the computer are not cleared when the power is turned off (see
Output MCACC data on page 112).
40
En
CONTROL ON/OFF
HOME STANDARD ADVANCED STEREO MULTI-ZONE SPEAKERS
THX SURROUND SURROUND
iPod
iPhone
USB
MCACC
SETUP MIC PHONES
iPod cable
(supplied)
MENU


iPod
• Switch the receiver into standby then connect your
USB device to the USB terminal on the front panel of
this receiver.
• For instructions on playing the USB device, see
Playing a USB device on page 49.
TUNER EDIT BAND
VIDEO CAMERA
Connecting a USB device for Advanced
MCACC output
When using Full Auto MCACC (page 43), Auto MCACC
(page 104) or Acoustic Calibration EQ Professional
(page 108) to calibrate the reverb characteristics of your
listening room, the 3D graphs of the reverb

characteristics in your listening room (before and after
calibration) can be checked on a computer screen. SC-37
only: Also, the speakers' group delay characteristics
before and after calibration can be checked on 3D
graphs.
The various MCACC parameters can also be checked on
the computer. MCACC data and parameters are
transferred from this receiver to a USB device and by
connecting the USB device to a computer, the data is
imported via the MCACC software in the computer.
The MCACC software to output the results is available
from the support area of the Pioneer website (http://
www.pioneerelectronics.com/PUSA/
Home+Entertainment+Custom+Install). Instructions
for using the software are also available here. If you have
any questions regarding, please contact the Customer
Support Division of Pioneer.
See the documentation provided with the Advanced MCACC
PC Display Application Software for more information.
• For the USB device connection and operations, see
Output MCACC data on page 112
1
CONTROL ON/OFF
AUTO SURR/ALC/ HOME STANDARD ADVANCED STEREO MULTI-ZONE
STREAM DIRECT THX SURROUND SURROUND
iPod
iPhone
HDMI 5 USB MCACC
SETUP MIC
USB mass
storage device
USB keyboard
2
.
SPEAKERS
PHONES